Rockville, MD · Stair contractor

Hardwood & vinyl stair installation in Rockville, MD

Carpet-to-hardwood conversions, solid oak tread and riser installation, luxury vinyl stair systems, and railing work — stain-matched to your floors and priced per step, in writing.

Get per-step pricing · (240) 343-3514
  • Installing since 2009
  • 2,300+ Maryland floors
  • MHIC licensed & insured
Luxury vinyl stair tread and nosing installation in a Rockville, MD home
Next-dayinstallation slots available
17 yrsinstalling floors in Maryland
2,300+Maryland floors completed
Freein-home estimates, no pressure

Stair work we do in Rockville

Carpet-to-hardwood conversion

Carpet and staples out, solid oak treads and painted or oak risers in, stained to match your floors. The single biggest visual upgrade a foyer can get.

Typical: $150-$250 per step

Hardwood tread & riser installation

New solid treads over sound stringers, prefinished for same-day use or site-finished for an exact match to new hardwood.

Typical: $110-$220 per step

Luxury vinyl stair installation

Purpose-made vinyl treads and nosings that continue your LVP flooring up or down the stairs. Never planks bent over an edge — those fail, and we won't install them.

Typical: $95-$160 per step

Railings, balusters & repair

Loose balusters re-set, handrails refinished or replaced, squeaky and worn treads rebuilt. Full balustrade replacement quoted on site.

Quoted on photos or on site

Stair installation cost in Rockville, MD

Per-step pricing typical for 20850, 20851, 20852, 20853. A standard straight flight is 12-14 steps; landings and winders are itemized separately.

Prefinished oak tread & riser (per step) $110-$175 Installed, walk on it the same day
Site-finished hardwood stairs, stain-matched (per step) $140-$220 Custom stain matched to your floors
Carpet-to-hardwood stair conversion (per step) $150-$250 Demo, new solid treads, painted or oak risers
Luxury vinyl stair system w/ nosing (per step) $95-$160 Purpose-made stair parts, never bent planks
Handrail, balusters & newel work Quoted on site Repair, refinish, or full balustrade replacement

Ranges reflect current Montgomery County rates; confirmed in writing after a free measure. Stair sanding and refinishing of existing treads is priced on our refinishing page.

Local knowledge, not boilerplate

Staircases in Rockville specifically

Ramblers keep staircases rare on Rockville main levels, so most of our stair work here is split-level half-flights in Twinbrook and Rockcrest — short runs that squeak, thud, and wear through at the nose. We rebuild them with solid oak treads at roughly a day per flight. In King Farm townhomes it's the classic carpet-to-oak conversion on the main stack, stain-matched to the existing floors.

Solid oak hardwood stair installation completed by our Rockville, MD stair contractors

How a Rockville staircase job runs

Measure and stain sample

Every tread measured individually — old stairs are never uniform — and stain sampled on real oak against your floor, not a brochure chip.

Demo and substructure check

Carpet, staples, and old nosing out. We check stringers and wedges while the stairs are open, and fix squeaks at the source before anything is covered.

Treads, risers, and rail

Solid treads and risers installed one section at a time, so the staircase stays usable each evening. Railing work happens in the same visit.

Finish and match

Site-finished stairs get the same stain and sheen schedule as your floors, so the staircase reads as original to the house, not an add-on.

Rockville stair questions, answered

What does hardwood stair installation cost in Rockville, MD?

Figure $110-$220 per step installed depending on prefinished versus site-finished, plus railing work if wanted. A typical 13-step Rockville staircase converted from carpet to stain-matched oak runs $2,000-$3,300 all-in. Landings, winders, and balustrade work are quoted as visible line items, never surprises.

Hardwood or vinyl on my stairs — which is right?

Stairs take more abuse per square foot than any floor in the house. Solid hardwood treads are the durability and resale winner, and the right call whenever the stairs meet a hardwood level. Vinyl stair systems make sense when the connecting floors are LVP and you want a continuous look, or on secondary and basement stairs — but only with purpose-made stair-nosing parts. Planks bent over a stair nose fail, and we won't install them that way.

Can you match new stairs to my existing floors in Rockville?

Yes — that's most of the job. We stain-sample on an actual tread against your floor, not a brochure chip, and finish in the same sheen so the staircase reads as original to the house. In Twinbrook we've matched everything from new prefinished oak to floors sanded on site the same week.

Can we still use the stairs while you work?

For prefinished and vinyl systems, yes: we typically work one section at a time and the staircase is walkable every evening, with most Rockville staircases finished in 1-2 days. Site-finished stairs need finish cure, so we schedule those coats for evenings or when the household can use another route, and you get the day-by-day plan in writing before we start.

Get your fixed written quote in Maryland

Tell us what the floor is doing. We measure in person, quote a fixed number, and honor it for 60 days. MHIC #05-155xxx.

Call (240) 343-3514

Mon to Sun, 10am to 7pm, by appointment only · Same-day callbacks

Call (240) 343-3514 · Free estimate