Chevy Chase, MD · Refinishing & sanding
Hardwood refinishing & sanding in Chevy Chase, MD
Dust-contained sanding, stain sampled on your actual floor, and finishes chosen for how your family lives. The best value upgrade in Chevy Chase real estate.
Get refinishing pricing · (240) 343-3514
Full sand or screen-and-recoat? We'll tell you honestly
Half the "refinishing" calls we get in Chevy Chase don't need a full sand. If your finish is dull and scratched but not worn through to raw wood, a screen-and-recoat refreshes it at roughly a third of the price. If boards are gray, cupped, or bare in traffic lanes, sanding is the real fix. The water-drop test at your estimate settles it in thirty seconds, and we quote whichever your floor actually needs.
Most 20815 floors have been sanded two or three times since the Coolidge administration, so we measure remaining wear layer above the tongue before quoting. If there's 1/8" left we sand; if not, we recommend a chemical-etch recoat and tell you why. Homeowners here overwhelmingly ask for matte or satin waterborne finishes that read original rather than glossy.
Stains and sheens Chevy Chase homeowners are choosing
Sampled as large swatches on your floor before you commit, because stain reads differently on every house's wood.
Cost to refinish hardwood floors in Chevy Chase, MD
Per-square-foot ranges typical for Montgomery County. Furniture moving, shoe-base removal, and stair work quoted as visible line items.
A Chevy Chase refinish, day by day
Day 1: Containment and rough sanding
Doorways and HVAC returns sealed, vacuum-contained machines take the old finish to clean wood.
Day 2: Fine sanding and stain
Progressively finer grits, hand-detailed edges and corners, water-pop, and your sampled stain applied.
Days 3-4: Finish coats
Three coats with abrading between. Light foot traffic 24 hours after the final coat.
Day 5+: Cure and move-back
Furniture without rugs at 72 hours, rugs at two weeks. The full schedule is written into your quote.
Refinishing questions from Chevy Chase homeowners
What does it cost to refinish hardwood floors in Chevy Chase?
$4-$7 per sq ft depending on stain and finish system. A typical 800 sq ft Chevy Chase main level runs $3,400-$5,100. If your finish is worn but not through to bare wood, a screen-and-recoat at $1.75-$2.5 per sq ft may be all you need, and we'll tell you when it is.
Is your sanding really dustless?
Industry-honest answer: it's dust-contained, not dust-free. Our machines run sealed vacuum containment that captures the overwhelming majority of dust at the drum, we seal doorways and HVAC returns, and Chevy Chase clients routinely stay in the home during sanding. You will not be wiping oak dust off shelves for a month.
How many times can my Chevy Chase floors be sanded?
Solid ¾" hardwood takes 4-6 sandings over its life; engineered floors depend entirely on wear-layer thickness. Chevy Chase Village, Martin's Additions, and Section 3 are packed with 1910s-to-1930s colonials still carrying their original 2-1/4" red and white oak strip flooring. Before quoting a full sand we measure remaining wood above the tongue at a vent or closet, so you never pay to sand a floor that can't take it.
How long until we can walk on the floors and move furniture back?
Waterborne finishes: light foot traffic in 24 hours, furniture (no rugs) at 72 hours, rugs at 2 weeks. Oil-based adds a day at each step. A standard Chevy Chase refinish is a 3-5 day job door to door, and we put the cure schedule in writing on day one.